home *** CD-ROM | disk | FTP | other *** search
-
-
-
-
-
-
- The other file in this ARC is a simple starting point to using ATO
- within DESQview (either 2.00 or 2.01). To use this setup file:
-
- 1. Transfer it to the directory containing your ATO executable
- program.
-
- 2. From within DV, open the Add Program (AP) window, specify O
- (for Other), enter the path to your ATO program, and press
- <enter>.
-
- 3. You should be presented with a menu which includes (probably
- as the only entry) the choice "CompuServe". Move the cursor
- down to it, press <space>, then <enter>.
-
- 4. Press <enter> once more to indicate you are done adding new
- programs.
-
- 5. Now open the Change Program (CP) window to change the AT
- window you just added.
- a. You will probably need to change the program name (which
- I just left at ATO since I did not know which version
- might be desired).
- b. I have the memory set at 300K. Depending on version, you
- can probably get by with 240K or even less.
- c. I also have the window set to open up full screen. If
- you want it to only occupy part of the screen, use F1 to
- go to the advanced options screen and blank out the
- entries in the Starting Height and Starting Width boxes.
-
- You should be ready to go now.
-
- Thanks are due to Dave Hoagland for pointing out the easier way to
- install a transferred .DVP file in DESQview.
-